Sub-station

What are the need to pay attention to the processing of the stainless steel ice bucket?

by:Xianke     2020-05-25
Through visiting survey feedback to customer in the process of using stainless steel ice bucket, more or less always encounter some difficult to solve the problem. In line with the convenience of customers, customer service principles, we will not regularly carry out some knowledge about the stainless steel ice bucket on activities, the customer often encountered or is difficult to solve the problem with everybody discussion, and find a solution, hoping to bring help to the customer, better use of our products. Activity in the interpretation of this issue, then, we will discuss the processing of the stainless steel ice bucket and explain the problem, then please see the following article: 1, raw material preparation, stainless steel ice bucket should be face to face or back to back to put, also pay attention to the tool wear condition and whether there is a burr, etc. 2, zero cutting processing, should first confirm it if there is a scratch phenomenon, in order to check the incoming quality. Scratches, if any, shall be returned to, can't carry on the processing. 3, to bend, to check the lower die and whether there is impurity on the sheet metal or foreign body, if you have not for bending operation, in case of crushed. 4, cut to zero during welding, welding workbench should maintain and clean level off, without any foreign body, should be timely to get rid of. 5, if the stainless steel ice bucket needs to be coated, should be registered first, and then operate. If there are wounds, shall report in a timely manner, and handled in time, not delay. Welcome you the presence! Please baidu: frozen plate, stainless steel instruments, the stainless steel ice bucket
Custom message
Contact